What are the raw materials of soap?

What are the raw materials of soap?

Soap is a combination of animal fat or plant oil and caustic soda. When dissolved in water, it breaks dirt away from surfaces. Through the ages soap has been used to cleanse, to cure skin sores, to dye hair, and as a salve or skin ointment. But today we generally use soap as a cleanser or perfume.

The exact origins of soap are unknown, though Roman sources claim it dates back to at least 600 B.C. , when Phoenicians prepared it from goat’s tallow and wood ash. Soap was also made by the Celts, ancient inhabitants of Britain. Soap was used widely throughout the Roman empire, primarily as a medicine. Mention of soap as a cleanser does not appear until the second century A.D. By the eighth century, soap was common in France, Italy, and Spain, but it was rarely used in the rest of Europe until as late as the 17th century.

Manufacture of soap began in England around the end of the 12th century. Soap-makers had to pay a heavy tax on all the soap they produced. The tax collector locked the lids on soap boiling pans every night to prevent illegal soap manufacture after hours. Because of the high tax, soap was a luxury item, and it did not come into common use in England until after the tax was repealed in 1853. In the 19th century, soap was affordable and popular throughout Europe.

Early soap manufacturers simply boiled a solution of wood ash and animal fat. A foam substance formed at the top of the pot. When cooled, it hardened into soap. Around 1790, French soapmaker Nicolas Leblanc developed a method of extracting caustic soda (sodium hydroxide) from common table salt (sodium chloride), replacing the wood ash element of soap. The French chemist Eugene-Michel Chevreul put the soap-forming process (called in English saponification) into concrete chemical terms in 1823. In saponification, the animal fat, which is chemically neutral, splits into fatty acids, which react with alkali carbonates to form soap, leaving glycerin as a byproduct. Soap was made with industrial processes by the end of the 19th century, though people in rural areas, such as the pioneers in the western United States, continued to make soap at home.

Raw Materials

Soap requires two major raw materials: fat and alkali. The alkali most commonly used today is sodium hydroxide. Potassium hydroxide can also be used. Potassium-based soap creates a more water-soluble product than sodium-based soap, and so it is called “soft soap.” Soft soap, alone or in combination with sodium-based soap, is commonly used in shaving products.

Animal fat in the past was obtained directly from a slaughterhouse. Modern soapmakers use fat that has been processed into fatty acids. This eliminates many impurities, and it produces as a byproduct water instead of glycerin. Many vegetable fats, including olive oil, palm kernel oil, and coconut oil, are also used in soap making.

Additives are used to enhance the color, texture, and scent of soap. Fragrances and perfumes are added to the soap mixture to cover the odor of dirt and to leave behind a fresh-smelling scent. Abrasives to enhance the texture of soap include talc, silica, and marble pumice (volcanic ash). Soap made without dye is a dull grey or brown color, but modern manufacturers color soap to make it more enticing to the consumer.

The Manufacturing Process

The kettle method of making soap is still used today by small soap manufacturing companies. This process takes from four to eleven days to complete, and the quality of each batch is inconsistent due to the variety of oils used. Around 1940, engineers and scientists developed a more efficient manufacturing process, called the continuous process. This procedure is employed by large soap manufacturing companies all around the world today. Exactly as the name states, in the continuous process soap is produced continuously, rather than one batch at a time. Technicians have more control of the production in the continuous process, and the steps are much quicker than in the kettle method—it takes only about six hours to complete a batch of soap.

The Kettle Process


Fats and alkali are melted in a kettle, which is a steel tank that can stand three stories high and hold several thousand pounds of material. Steam coils within the kettle heat the batch and bring it to a boil. After boiling, the mass thickens as the fat reacts with the alkali, producing soap and glycerin.


The soap and glycerin must now be separated. The mixture is treated with salt, causing the soap to rise to the top and the glycerin to settle to the bottom. The glycerin is extracted from the bottom of the kettle.

Strong change

To remove the small amounts of fat that have not saponified, a strong caustic solution is added to the kettle. This step in the process is called “strong change.” The mass is brought to a boil again, and the last of the fat turns to soap. The batch may be given another salt treatment at this time, or the manufacturer may proceed to the next step.


The next step is called “pitching.” The soap in the kettle is boiled again with added water. The mass eventually separates into two layers. The top layer is called “neat soap,” which is about 70% soap and 30% water. The lower layer, called “nigre,” contains most of the impurities in the soap such as dirt and salt, as well as most of the water. The neat soap is taken off the top. The soap is then cooled. The finishing process is the Developed around 1940 and used by today’s major soap-making companies, the above illustrations show the continuous process of making soap.

The Continuous Process


The first step of the continuous process splits natural fat into fatty acids and glycerin. The equipment used is a vertical stainless steel column with the diameter of a barrel called a hydrolizer. It may be as tall as 80 feet (24 m). Pumps and meters attached to the column allow precise measurements and control of the process. Molten fat is pumped into one end of the column, while at the other end water at high temperature (266°F [130°C]) and pressure is introduced. This splits the fat into its two components. The fatty acid and glycerin are pumped out continuously as more fat and water enter. The fatty acids are then distilled for purification.


The purified fatty acids are next mixed with a precise amount of alkali to form soap. Other ingredients such as abrasives and fragrance are also mixed in. The hot liquid soap may be then whipped to incorporate air.

Cooling and finishing

The soap may be poured into molds and allowed to harden into a large slab. It may also be cooled in a special freezer. The slab is cut into smaller pieces of bar size, which are then stamped and wrapped. The entire continuous process, from splitting to finishing, can be accomplished in several hours.


Most toiletry soap undergoes additional processing called milling. The milled bar lathers up better and has a finer consistency than non-milled soap. The cooled soap is fed through several sets of heavy rollers (mills), which crush and knead it. Perfumes can best be incorporated at this time because their volatile oils do not evaporate in the cold mixture. After the soap emerges from the mills, it is pressed into a smooth cylinder and extruded. The extruded soap is cut into bar size, stamped and wrapped.


Glycerin is a very useful byproduct of soap manufacture. It is used to make hand lotion, drugs, and nitroglycerin, the main component of explosives such as dynamite.

How is soap made?

Made From Scratch

Handcrafted soaps made from scratch require three ingredients to become soap: oil (animal or vegetable oil, not petroleum-based oil), water and lye. These three ingredients, mixed together in correct proportions, combine and chemically change into soap – a process called “saponification”. They may include other ingredients to provide additional benefits or to color or scent the soap, but these are not part of the chemical process that results in basic soap.

An accurate recipe is necessary, in order to ensure that the right amount of lye is used for the specific oils selected. A lye calculator can be used to calculate the right amount of lye, although it can also be calculated based on the type and quantity of oils being used.

The solid lye is mixed with water to dissolve it. The amount of water depends on the particular recipe, but is usually 2 to 3 times the amount of lye, based on weight. When the lye is added to the water the solution gets hot. It is important to remember that lye is highly caustic and can cause severe burns if it comes in contact with skin for more than a few seconds. Proper protective gear, including at least gloves and goggles, should be used when handling lye or incomplete soap.

Cold Process Soap

The term “cold process” refers to the fact that no heat is applied during soapmaking.

The lye solution is normally cooled to room temperature before it is added to the oils. The oils are then heated as necessary to melt any solid fats or butters and generally cooled to between 80° – 110° F, depending on the recipe formulation.

Once the lye solution and oils are at the desired temperature, they are combined together and mixed. As mixing continues, the mixture will gradually thicken. It will also get warmer, sometimes quite hot, depending on the starting temperature and the formulation. This is the chemical reaction of the oils and lye becoming soap.

Once the mixture has reached “trace” (the point at which mixture dribbled from a spoon will leave a brief trace on the surface), any other ingredients (scent, color, herbs, clays, etc) are added to the soap and thoroughly incorporated.

At that point, the soap is ready to be poured into molds. The entire batch can be poured into one mold, to be cut up after it solidifies, or the soap can be poured into individual molds, depending on the preference of the soapmaker and the formulation. Once in the mold, the soap is left to cool and finish the saponification process. Often it is insulated in the mold to slow the cooling process and increase the saponification time.

Once the soap is completely cool and solid, it can be unmolded. If it was poured into one mold, this is the time to cut it into bars. The soap will be solid, but should be soft enough to cut.

The final stage is curing the soap for 3 – 8 weeks to allow the excess water to evaporate out. The length of time will depend on the amount of water used in the soap as well as the temperature, relative humidity and air circulation where they are located. The soap can be used before then, but it will still be relatively soft. The longer the water is allowed to evaporate out of the soap, the harder the soap will be.

Hot Process Soap

“Hot process” soap refers to the fact that an outside source of heat is applied to make the soap.

With hot process soap, the lye solution and oils are mixed together and then an outside source of heat is used to keep the temperature up. The added heat reduces the time needed to ensure the chemical process (saponification) is completed.

Once the soap is completed, it is still in liquid form because of the higher temperatures (essentially, it is soap in a “melted” form). When fully saponified, it can be poured into molds in the same manner as cold process soap, and cut as needed when cooled and hardened.

Because hot process soap is fully saponified when poured into the molds, no additional time is needed in the molds to complete the process. Hot process soap may still be cured to allow additional water evaporation to harden the bars, although less curing time, if any, is generally needed.

Once the bars, whether made by cold or hot process are sufficiently cured and hardened, they can be packaged as desired and, of course, used!

Ready-Made Soap Base

Ready-Made soap base is already soap, so all the steps necessary to producing the soap itself are eliminated. The soapmaker’s concentration can be focused on the artistic, aesthetic and beneficial aspects of the soap.

Also referred to as “melt and pour” or “MP” soap, ready-made soap base comes in a solid block. Following the manufacturer’s directions, the soap is heated up in order to melt it into a liquid state. At that point, colors, scents and other ingredients can be added to the soap. Once the additives are incorporated into the soap, it is poured into molds and allowed to cool and solidify. Once hardened, it can be unmolded and is ready for packaging and/or use.

Ready-Made Soap base is available as both clear or opaque soap and is especially useful for specialty shaped soaps for which a wide variety of individual molds are available. With the versatility of ready-made soap base, soapmakers have a wide range of creative possibilities, including placing colorful embeds of soap or even toys in soap or producing soaps that look like food or other items.